I am excited to for my first post in a while. I have been moving, unpacking, painting etc. But I decided to being sharing the new DIY projects being done in our home as we settle in. Today's project is a Faux Frosted Glass Moroccan Tile Window Treatment. You can view the Video or Written Tutorial below. I found a printable from 7th House on the Left's blog. This project cost me $5.98! That's it!
Please PIN, SHARE, COMMENT or POST this tutorial if you like what you see.
Here is my tutorial video:
Window Treatment Under $10 - Faux Frosted Glass Tutorial Moroccan Tile Pattern
This is what I did with Tutorial and Printable I found on Pinterest from The 7th House on the Left.
- Frosted Contact Paper (buy one extra roll for mistakes) (This was the only item I had to buy, cost $5.98, two rolls)
- Printable Pattern from 7th House on the Left
- Tape Measure
- Poster Board/Cardboard (something easy to cut and yet durable to be traced many times)
- Optional: Computer or copier that can blow up the printable
Step 1 - The Printable:
Print the printable from 7th House on the Left. Use your computer or copier to change the size of the template. Once the desired size is acquired, trace it to your poster board/cardboard piece to create your stencil that is strong for multiple tracings. Notice the tips on the printable.
Step 2 - Tracing and Cutting:
Open the roll of the Frosted Contact Paper and turn over so the grid lines on the back are available for tracing on. Trace all your tiles this way. When my hand started to hurt from cutting I took a break and did some installing. When cutting try to make a continuous cut not choppy. Move the paper, not the scissors for a smoother result. Here is a video for some great cutting tips with scissors (I know it sounds silly but there are tips that make it easier I promise). Make sure this each pattern is centered on the grid for maximum usage of the contact paper and for easier installation in Step 5.
Step 3 - Clean your Windows:
Clean the window with a micro fiber cloth and cleaning supplies leaving no streaks, no residue, no fuzz, and no fingerprints. Keep a dry micro fiber cloth handy for spot cleaning finger prints on the glass as your installing the contact paper tiles.
Step 4 -Beginning at the Center:
To begin I measured the glass and found the center of the window. I placed my first full tile there (with the application technique found in Step 5.) I then worked to the right or left moving from the center to the outer edges. Every other row with this pattern will have a center tile and I ALWAYS began with it, measured it and made sure it was level then worked off of it to apply the rest of the tiles in that row.
Step 5 -Applying the Tiles
Levels are key! I peal back the bottom 1/2 of the backing on a tile, folding it up and matching the grid to the top half. Leaving the top half on to use the grid lines as a guide with the levels. Check the vertical level of each tile and the horizontal level of each row when completed. (this is best explained in my Tutorial Video)
Step 6 - Fill in the Sides
You can see in the photo above there are many partial tiles that run along the vertical sides (left and right) of the window. I used the edge scraps from our cut out of the contact paper. Peal the backing off. Set the curves into the spaces and then trim off the excess.
That is it! Your done!!!!
This took two rolls of Frosted Contact paper. If you have bubbles please refer to the end of my Window Treatment Under $10 - Faux Frosted Glass Tutorial Moroccan Tile Pattern the video also shows tips on how to avoid bubbles.
EDIT: This post has been highlighted on the Party Time Tuesday Blog where a wonderful Design Team posts daily to inspire you. On Tuesdays they have weekly challenges offering prizes for participants. Go check Party Time Tuesdays Your Daily Dose out! Your going to love it!